Bellage Medical Spa Electric Treatment/Procedure Chair (Table) - Fully Electric 4 Motor Chair

Movements

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric seat tilt adjustment
• Electric height adjustment
• Manual removable armrests
• Manual headrest extension
• Manual leg rest extension

• Length without head rest or leg rest: 58.5"
• Length with headrest and leg rest on: 75"
• Length with headrest and leg rest extended: 88"
• Width without armrests on: 25"
• Width with armrests on: 35"
• Heights: 24" - 36"
• BASE ONLY Dimensions: 36" L x 23" W
• Backrest angle: 0° to 80° incline
• Bed tilt angle: 0° to 10°
• Leg rest angle: 0° to 85° decline
• Maximum Capacity: 350 lbs.
• Colors available: Black, White, or Beige
• Comes with two different headrests for different procedures
• Removable leg cushion
• Removable arms
• Optional foot controls available
• Leveling feet on base
• Breather hole for when clients are face down
• Adjustable headrest angle
• 100-120 volts
• 50-60 hertz
• 200 watts
• Power: 2 amp

* All height measurements are from ground to top of cushion

* All measurements have a 0.25 to 1.2-inch tolerance

Disclaimer

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability

1. Be sure bed is on a level, non-slippery surface.
2. Be sure to adjust self-leveling feet.
3. Always orient the bed in-line or parallel with the base for treatment purposes.
4. When rotating the bed, it is recommended that there be no client on the bed at that time.
5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.