Hydraulic Chair With Stool (Facial Bed, Massage Table)

• Manual backrest angle adjustment
• Manual leg rest angle adjustment
• Manual height adjustment (hydraulic pump assisted)
• Manual removable arm rests
• Colors available: White or Black
• Unit arrives fully assembled
• Comes with a FREE beauty stool in matching color
• Rotates 360° (Only when the chair is raised to the highest setting)
• Rotation can be stopped with courtesy stopper
• Removable pillow
• Face hole cutout for when clients are face down
• Leveling feet on base

• Length: 73.5"
• Width without armrests: 25"
• Width with armrests: 32"
• Heights: 24" - 29"
• Base dimensions (BASE ONLY): 36" x 21.5"
• Backrest angle: 0° flat to 69° incline
• Leg rest angle: 0° flat to 69° decline
• Weight: 100 lbs.
• Maximum Capacity: 300 lbs.

* All height measurements are from ground to top of cushion

Disclaimer

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability

1. Be sure bed is on a level, non-slippery surface.
2. Be sure to adjust self-leveling feet.
3. Always orient the bed in-line or parallel with the base for treatment purposes.
4. When rotating the bed, it is recommended that there be no client on the bed at that time.
5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.