Sage Electric Spa Treatment Table, Massage & Facial Bed

Movements

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric height adjustment
• Manual rolling wheels for easy table movement

Note: The backrest and leg rest sections operate independently of each other

Dimensions / Specifications

• Length: 78"
• Width: 30"
• Heights: 23" – 36.5”
• BASE ONLY Dimensions: 49.5"L x 24.5"W (The base length gets longer as the height goes down. Please refer to video to see.)
• Backrest angle: 0° flat to 70° incline
• Center section: 0° flat to 28°
• Weight: 200 lbs.
• Maximum Capacity: 450 lbs.
• Cushion thickness: 4"
• Color available: White
• High-quality, easy-to-clean PU upholstery
• Ultra-soft, high-comfort padding
• Natural wood finish on scissor-style base
• Paper holder included
• 3 quiet motors that adjust the height, the backrest, and the central module inclination
• Face-hole for when clients are face down
• Handset remote control included
• Frequency: 50Hz/60Hz
• Certification: CE

* All height measurements are from ground to top of cushion

* All measurements have a 0.25 to 1.2-inch tolerance

Download Manual

Disclaimer

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability

1. Be sure bed is on a level, non-slippery surface.
2. Be sure to adjust self-leveling feet.
3. Always orient the bed in-line or parallel with the base for treatment purposes.
4. When rotating the bed, it is recommended that there be no client on the bed at that time.
5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.