Cleo Electric Spa Treatment Table (Facial Massage Bed)

Movements

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric height adjustment
• Manual rolling wheels for easy table movement
• Manual removable face cradle
• Manual removable armrests

Note: The backrest and leg rest sections operate independently of each other

• Colors Available: Gray, Dark Brown, Beige, and White
• ADA Compliant
• PU upholstery; ultra-durable material
• Heavy-duty facial table/chair
• Reversible and removable arm rests
• Table paper holder included
• Super-duty, stable base
• Ultra-quiet motors

• Length without face cradle attached: 75"
• Length with face cradle attached: 86.5"
• Width without armrests: 30"
• Width with armrests: 45”
• Heights: 15.5" – 34.5”
• Base dimensions (BASE ONLY): 50" x 26" (Note: The length of the base changes based on the table height. Please refer to the video to see.)
• Backrest adjustment from 0° flat to 70° incline
• Table Weight: 178 lbs.
• Maximum Weight Capacity: 500 lbs.
• Frequency: 50-60 Hz
• Power Consumption: 200 W
• Voltage: AC 100-120 V

* All height measurements are from ground to top of cushion

Disclaimer

When operating a hydraulic or electric rotating facial bed or treatment table, it is the operator’s responsibility to ensure the safety of their clients.

To ensure stability

1. Be sure bed is on a level, non-slippery surface.
2. Be sure to adjust self-leveling feet.
3. Always orient the bed in-line or parallel with the base for treatment purposes.
4. When rotating the bed, it is recommended that there be no client on the bed at that time.
5. If there is a client on the bed during rotation, it is recommended that client be seated in the upright sitting position.
6. When rotating the bed, if there is a client in the bed, the bed MUST be held from underneath at the head of the bed by the operator as it is in rotation.
7. Sitting on either the head or the foot of the bed is strictly forbidden, regardless of the position of the bed.
8. Hydraulic or electric rotating facial beds or treatment tables are not designed for massage. Excess downward pressure can cause instability.
9. Aligning the bed perpendicular to the base or using the bed on a slippery surface may cause the bed to become unstable. Injury to patron may occur.