Lucera Professional Electric Treatment / Procedure Chair (Table) - Fully Electric 4 Motor Chair

Movements

• Electric backrest angle adjustment
• Electric leg rest angle adjustment
• Electric height adjustment
• Electric seat tilt adjustment
• Manual chair rotation
• Manual removable armrests
• Manual headrest extension
• Manual leg rest extension

Feature Highlights

• 240° rotating seat for versatile positioning
• ADA-compliant 19" minimum entry height
• Built-in side controls and handheld remote control
• Two programmable memory positions
• One-touch reset function
• Adjustable headrest for customized comfort
• Safety control lock and emergency stop switch
• LED accent lighting with 16 colors and 12 brightness levels
• Sturdy base designed for stability during professional spa and salon treatments

Dimensions/Specifications

• Voltage: AC100-240 V
• Frequency: 50/60 Hz
• Power Consumption: 300 VA max
• Backrest Adjustment Angle: 0° flat to 85° incline
• Height Range: 18.8" - 31.8"
• Length with Headrest: 71.5"
• Table Tilt Angle, Back: 0° to 15°
• Leg Rest Angle Down: 0° to 83°
• Width with Armrests: 32.6"
• Width without Armrests: 24"
• Weight Capacity: 440 lbs.

Stability and Safe Operation

When operating a hydraulic rotating chair or single-post electric treatment table, the operator is responsible for maintaining stability and ensuring client safety. Always follow the instructions provided for the specific model.

1. Place the chair or table on a level, dry, and non-slip surface. Adjust the leveling feet, if equipped, so the base remains stable and does not rock.
2. Inspect the base, controls, adjustment mechanisms, and fasteners before each use. Do not operate the unit if any component is loose, damaged, or functioning improperly.
3. Keep the client’s weight centered over the base. Position the chair or tabletop in line with the base whenever possible, particularly during treatment.
4. Do not allow anyone to sit, stand, lean, or place excessive weight on the headrest, backrest, leg rest, foot section, or armrests.
5. Whenever possible, rotate or reposition the unit before the client enters it. Do not rotate or adjust the unit while the client is entering or exiting.
6. If rotation is necessary while occupied, place the client in a stable upright position, keep the client centered, support the chair or table securely, and rotate it slowly.
7. Keep hands, feet, clothing, cords, and other objects away from moving parts and potential pinch points during rotation or adjustment.
8. Ensure all rotation locks and adjustable sections are securely engaged before beginning treatment.
9. Do not exceed the stated weight capacity or apply sudden, concentrated, or excessive downward pressure. These products are not intended for massage or procedures that require substantial downward force.
10. Do not leave a client unattended while the unit is elevated, reclined, rotating, or being adjusted.
11. Stop using the unit immediately if it becomes unstable, shifts unexpectedly, makes unusual sounds, or fails to hold its selected position.